The Importance of Floor Screening

Floor screening is a common maintenance method that effectively addresses dulling of engineered hardwood floors while providing an additional layer of protection to the wood. It is also a cost-effective alternative to more invasive floor refinishing procedures. This section explores the importance of understanding this critical process, while also addressing some of the underlying considerations that go into making sure it is done properly.

The appearance of scuff marks and scratches on a hardwood floor is an early indicator that a screen and recoat may be needed. The procedure abrades the surface slightly with a floor buffer equipped with a fine grit screen and then applies a new coat of polyurethane on top. This service can be performed as often as every two years.

The Essential Guide to Floor Screening: What You Need to Know

Unlike sanding, which removes all of the old finish and exposes the bare wood underneath, screening only abrades the polyurethane coating. This is why it is sometimes referred to as a light sanding or buff and recoat.

When a professional performs a screen and recoat, it is important to prepare the room by removing furniture, rugs, and other items. It is also a good idea to vacuum or sweep the floors to eliminate any dust or debris. The floors must be in a clean state and free of wax or other coatings that may prevent the new polyurethane from bonding properly. It is also essential to have the proper tools and safety equipment, including a floor buffer with appropriate grit screens, a dust mask, and eye protection.

Leave a Reply

Your email address will not be published. Required fields are marked *